01
A line-of-sight survey
Before anything is drilled. In Sandton the obvious wall is not always the right one.

Home/DStv services/DStv installation Sandton
DStv installation Sandton
Looking for DStv installers near you in Sandton? We supply and mount the dish, align it precisely with a signal meter, run the cabling neatly and set the decoder up so that it actually works before we leave.
Sandton is where we do most of our multi-room work. A typical job here is not one decoder and one television — it is an Explora in the lounge, a second decoder in the main bedroom, and often a third in a study or a flatlet, all running on Extra View off a single subscription.
That changes the installation fundamentally. Each decoder tuner needs its own dedicated feed from the dish, which means a twin or quad LNB and proper cable runs to each room. Splitting one cable and hoping is the single most common bodge we are called out to undo in Sandton.
We also mount televisions, so if you need the set on the wall and the DStv installed, we will do both in one visit and plan the cabling for both together — which is a great deal tidier than retro-fitting one around the other. See our TV installation page, or our TV repairs in Sandton page if something is already broken.
Where we work
These are the suburbs we are in most often. If yours is not listed, phone anyway — it almost certainly still falls inside our patch.
DStv installation in Sandton. On-site DStv technicians covering Sandton and the surrounding Gauteng suburbs.
Included
Standard, not optional extras.
01
Before anything is drilled. In Sandton the obvious wall is not always the right one.
02
Most Sandton installations run two or three decoders. That needs a twin or quad LNB and a dedicated feed per tuner — planned from the start, not retro-fitted.
03
Correct fixings for your substrate. A dish is a sail, and Highveld wind is not gentle.
04
Elevation, azimuth and skew, optimised for quality as well as strength — which is what gives you margin when it rains.
05
The LNB connector sealed properly. It is the single most common cause of failure two summers later.
06
Smartcard paired, channels scanned, remote paired, and the system demonstrated to you before we go.
Standards
All four are invisible — until they fail.
Aligned on quality, not just strengthIt is what keeps the picture alive in a Highveld storm
UV-rated cable, properly clippedGauteng sun destroys cheap coax within a few years
The correct LNB for your setupSingle, twin or quad. Extra View needs more than one feed
Sealed, weatherproofed connectorsNot wrapped hopefully in insulation tape
Earthing and surge protectionGauteng lightning kills LNBs. This is cheap insurance
Full activation and handoverScanned, paired, tested and demonstrated
Our process
01
New installation? Extra decoder? Moving house? Each is a different job, and the LNB depends on the answer.
02
Before a single hole is drilled. This is most of the job in Sandton.
03
Signal meter, proper fixings, weatherproofed connections, cable clipped and routed neatly.
04
Channels scanned, remote paired, system demonstrated. You watch television; we leave.
FAQ
What people in Sandton ask us most often.
WhatsApp us the error code on the screen and a photo of your dish. We can usually narrow a DStv fault down before a technician is even dispatched.
WhatsApp 063 866 0971Yes. Sandton is part of our regular Gauteng service area and we install here routinely, covering Sandhurst, Morningside, Bryanston, Rivonia and the surrounding suburbs. Dish, bracket, LNB, cabling, decoder setup and activation — all in one visit.
It depends on the dish, the LNB, how much cabling is needed and how many decoders you want to run. An Extra View installation with two or three decoders needs a twin or quad LNB and a dedicated feed per tuner, so it costs more than a single-decoder install. We quote the whole thing upfront — nothing is added afterwards.
A straightforward single-decoder installation in Sandton usually takes two to three hours, including the line-of-sight survey, mounting, alignment, cabling and setup. Extra View and multi-room installations take longer, because there is more cable to run and more to configure.
Most Sandton installations run two or three decoders. That needs a twin or quad LNB and a dedicated feed per tuner — planned from the start, not retro-fitted. It is one of the things we specifically look at on every Sandton installation.
Yes, and it is much the most sensible way to do it. One visit, one callout, and the cabling for both gets planned and concealed together rather than one being retro-fitted around the other.
Decoders and subscriptions are handled through MultiChoice. We supply and install the dish, bracket, LNB and cabling, and we will set up, activate and configure whatever decoder you have or acquire — including the Explora and Explora Ultra.
Often, where our schedule allows. Phone early in the day for the best chance and we will give you an honest answer rather than an optimistic one.
Nearby
Each area has its own page, with local suburbs and a map.
Book a DStv technician
Tell us how many decoders and which rooms, and we will quote the dish, the LNB, the cabling and the setup together.
DStv installation across Sandton and the wider Gauteng
Contact